News

Automatic Pet Feeder Portion Size: Meal Math and Refill Intervals for Clinics, Boarding Kennels and Multi-Cat Homes

Getting automatic pet feeder portion size right is arithmetic, not guesswork: the portion unit multiplied by meals per day has to equal the ration your diet plan sets, and the hopper has to cover the days between refills. This guide works through how long does a 6L automatic feeder last, how to calibrate a portion against a scale, and when an automatic feeder for multiple cats needs more than one unit.

How Do You Set Automatic Pet Feeder Portion Size from a Daily Diet Plan?

Portion size is a calculation, not a setting. Take the daily ration from the diet sheet your veterinarian or feed supplier provides, divide it by the number of meals, then convert that meal weight in grams into the feeder’s own portion unit by weighing a test dispense. Program the measured result, never the default.

What Is a Portion, and Why Is It Not a Standard Unit?

A portion is one dispense cycle: a gate opens for a fixed interval and a measuring chamber empties. Chamber volume is fixed per model, but kibble differs in diameter, shape and bulk density, so the same portion number delivers different weights on different feeders, commonly between 8 and 15 g.

Calibrate with a kitchen scale rather than a scoop. Run ten dispenses into a bowl, weigh the total and divide by ten. If ten dispenses weigh 115 g, each portion is 11.5 g and a 45 g meal is four portions. Repeat the check when the kibble brand changes.

How Long Does a 6L Automatic Feeder Last Between Refills?

Hopper capacity is published in litres, while diets are sold by weight, so multiply litres by the kibble’s bulk density from the diet specification sheet to get usable kilograms. A 6 L hopper at roughly 0.45 kg per litre holds about 2.7 kg, or 2,700 g. At 60 g per day that is 45 days between refills.

Worked Refill Intervals for Common Hopper Sizes

Using the same assumption of 0.45 kg per litre: a 3.5 L hopper holds about 1,575 g and lasts 26 days at 60 g daily; a 4 L hopper holds about 1,800 g and lasts 30 days; a 6 L hopper holds about 2,700 g and lasts 45 days. Subtract two or three days for residue the auger cannot pick up, and recalculate whenever the ration changes.

Bulk density is an assumption to confirm, not a published constant. Kibble sits in a wide band, so ask the diet supplier for a figure or weigh a known volume. Where a model publishes no capacity, treat the refill interval as to be confirmed per specification.

Automatic Feeder for Multiple Cats: How Many Feeding Points Do You Need?

Count feeding points, not devices. A portion-controlled feeder drops food into one bowl, so one animal per feeder is the reliable arrangement; otherwise a faster animal eats a slower one’s share. For four cats on the same diet you need four feeding points, supplied either by four single units or by paired bowls used under supervision.

Feeding Point Math for a Ward Run or a Cattery

Multiply animals by meals to size the daily event count: six cats fed twice daily means twelve dispensing events, which is six feeders working twice, not one feeder working twelve times. Shared hoppers suit only identical diets. Where animals are on different diets, label each unit and keep hoppers separate so a swap cannot happen during a busy shift.

Which Feeder Specifications Should You Compare Before Ordering?

Compare four figures before ordering: usable capacity in litres, the portion control method (app, built-in timer or manual), the power source, and published net weight, which drives freight cost. Camera, audio and app features add monitoring value but do not change feeding accuracy. Where a model publishes no capacity figure, request the specification sheet rather than assuming.

Reading the Specification Table

The table below covers the feeders currently offered in our smart feeder category. The 6 L camera feeder suits multi-day unattended feeding with a visual check-in. The 4 L CW-WS01 has the smallest footprint and runs from USB or battery. The 3.5 L H17 adds a 360° tracking camera, the H15 is timer-only with no app, and the H19 stand carries two stainless bowls for shared feeding points.

Product Type Model Capacity Control Power & Supply Published Data to Confirm
Camera feeder to be confirmed per specification 6 L App, timed portions, camera and two-way audio to be confirmed per specification Model code, power adapter rating
Smart feeder CW-WS01 4 L sealed hopper WiFi app, iOS and Android USB 5 V DC adapter supplied, battery mode supported Grams per portion, battery type
AI camera feeder H17 3.5 L App, 360° motion-tracking camera, speaker to be confirmed per specification Power adapter rating
Automatic feeder H15 to be confirmed per specification Built-in timer, no app to be confirmed per specification Hopper volume, power rating
Dual-bowl stand H19 Two stainless bowls Manual, no dispensing None required Bowl volume per bowl

What Goes Wrong in the First Month of Feeder Use?

Most first-month problems are commissioning faults rather than product faults: uncalibrated portions, hoppers filled above the marked line, dispense outlets reachable by a paw, and app accounts left on a manager’s phone. A two-week log of dispensed weight, refill date and account holder prevents nearly all of them.

A Two-Week Commissioning Log

Day one: weigh ten dispenses and record grams per portion. Day two: set the schedule and photograph the screen. Day seven: re-weigh a dispense to catch drift. Day fourteen: confirm the hopper seal and outlet are clean, then hand the account to a named person on a shared login. Keep a spare set of batteries on site.

Frequently Asked Questions

These are the questions buyers raise most often when comparing feeders for clinics, boarding kennels and multi-cat homes. The answers use the specifications above and the same arithmetic, so you can recalculate them for your own ration and hopper size before you commit to an order quantity.

How Many Grams Is One Portion on an Automatic Pet Feeder?

Commonly between 8 and 15 g, and it changes with kibble density. Weigh ten dispenses, divide by ten, and use that measured figure. Never carry a portion number across from another model, because chamber volume differs.

Can One Automatic Feeder Serve Two Cats?

Only with supervision, or with paired bowls filled in sequence, because one outlet drops food into one place. Cats on different diets need one feeder each. Cats on the same diet can share a dual-bowl stand if a person is present at mealtimes.

How Long Does a 4L Feeder Last for Two Cats?

About 1,800 g at 0.45 kg per litre. Two cats eating 60 g each take 120 g daily, so the hopper lasts roughly fifteen days before residue. Confirm bulk density from the diet sheet before you set a refill calendar for the site.

Do Clinic Ward Feeders Need App Control?

Not necessarily. App control matters where staff rotate often, where feeding must be verified remotely, or where portions change per patient. A timer-only unit is simpler to hand over and cannot be reconfigured by accident from someone’s personal phone.

Request a Quote

Tell us the species, weight range, daily ration and number of feeding points, and we will propose a feeder configuration with portion and refill figures worked out for your site. We supply pet hospitals, boarding kennels and distributors, with OEM and private-label options available on request.

For the stock and cleaning side of the same routine, our guide to kennel hygiene supplies and par levels covers bowls, carriers and washable items alongside these feeding points.

Leave a Reply

Your email address will not be published. Required fields are marked *